Saab 93 Key Fob Replacement
Saab key fobs 93 could be costly to replace. However the process is easy.
You'll need a flathead phillips screwdriver and a little patience. Simply insert the screwdriver in the middle of the case and slowly open to open it.
Having spare keys and fobs is an excellent idea. You will avoid being stuck and paying towing fees.
How do you replace a battery
Car key fobs that can lock and unlock your vehicle remotely have a battery that will eventually fail. In the event that this happens, owners can replace the battery of their key fob themselves in a couple of simple steps. The key fob has two plastic flaps on the one side that you have to lift to remove the battery that was in use and replace it with the new one. The replacement battery is an ordinary coin cell CR1632 and the procedure for installing it is relatively simple.
After you have removed the emergency key, you can use the flathead screwdriver with a small piece of wood to split the case. Don't force the case too hard as the electronics are fragile and could be damaged by too much pressure.
Saab produced some fantastic cars, and a lot of them still exist around the world today. The ignition keys are among the biggest problems associated with these cars. The buttons can get stuck or even fall off with time. If an Saab owner loses only one functioning key, it could be quite costly to buy an additional key at the dealer, as they need to replace the entire computer module, and then program it with the new key to convince the vehicle you are not trying to steal it. saab 93 key can save money by replacing the case.
How to Remove the Manual Key
All key fobs that allow you to lock and unlock your car contain batteries and the batteries have a life span. If you're like the majority they will go out at some point. Fortunately that replacing the battery that controls your key fob is simple. The only challenging part of the process is removing the old battery from the case. However, with a little patience and a flathead screwdriver, you can accomplish it.
After you've installed the battery, it's time to put everything back together. You'll need a flathead to open the replacement case of the key fob. Insert the screwdriver into the middle slot. Then, gently work the case until it splits in two and you can take it off of the key fob.
If your old keyfob lost its connection with the security system in your vehicle it is possible to change the program of the new one. You can do this by following the manual process to add a new key fob for your Saab 9-5. This method DOES NOT erase previously learned keys however, so you can use the existing FOBs in case they require reprogramming. To begin this process the FOB that is to be programmed must have a mechanical key cut matching that of the vehicle.
How to Change the Case
If you're replacing the battery or the manual key it's a good idea to replace the case too. The cases are susceptible to wear out, particularly after long-term use. It's simple to change the case of your SAAB 9-3, and you won't need any special tools.
To swap the case, you'll need to first remove the manual key from the key fob. You can do this by pressing the blue SAAB logo on the fob, then pulling the manual key out. The fob of the key can be sticky sometimes, so it might take a bit of force to take the key out.
Once you have removed the manual key from the case, you are able to begin removing the electronic components. To do this, you'll need a small screwdriver with a flat head. You'll want to be careful not to scratch the electronics inside, so be careful when using your screwdriver. Once you've removed all electronics, you'll be able to begin working on removing the battery. After you have replaced the battery, you can place everything back into the original case. You can purchase replacement cases online for the lowest price.
How to program the new Key
All key fobs, that permit you to lock or unlock your vehicle remotely, have batteries. However they have a short life span. It is important to remember this and replace the battery in your key fob at least every three to four years. This is a simple procedure that you can complete at home. All you need is a small screwdriver and some patience.
The first step is removing the manual key. Press the blue SAAB logo and then pull the emergency key out of the key fob. The key should be able to slide out with some force. Once you have the key fob in place then you can remove the old battery by gently pushing the screwdriver into the slot located in the middle of the case. This will split the case, making it easier to access the electronics.
Once you have the new battery and key fob case in place Now is the time to program the new key. This can be done by following the steps outlined in this video made by YouTube user Cyclone Cyd. This channel gives excellent instructions on how to perform simple repairs and maintenance on vehicles.
Key fobs are an excellent method of keeping an extra key for your vehicle in case you lose or break it. You can purchase a new keyfob through the internet or from local locksmiths like United Locksmith. The price is lower than at a dealership, which will charge you for the key and programming it to your car.